1967-1971 F-250 Twin I Beam 8 Lug 3/4 Ton Front Disc Brake Kit
***ONLY FITS FRONT TWIN I-BEAMS WITH PRESSED ON DRUMS. SEE FITMENT TAB FOR NOTES** ONLY FITS THE F250 WITH 12 X 2 OR 2-1/8" WIDE DRUM BRAKE SHOES*
WILL NOT FIT F350
Our Kit Does Both Sides of the Axle, and Includes: Raw Metal Brackets, Grade 8 Mounting Hardware, 12 1/2" Vented Rotors, Raw Metal Calipers with 18" Stainless Flexible Lines. Reuses stock hubs.
Front Disc Brake kits are Only Sold as Complete Kits
Kit Options Allow You to Upgrade Your Kit to Include:
- Calipers with Pads in Powder Coated Finish of Black
- Black Powder coated brackets
- Performance Drilled and Slotted Rotors
Disc / Drum Applications.
- You need a Dual reservoir master cylinder that is Disc / Drum and the correct proportioing valve. Can be found HERE
Disc / Disc Applications
- You need a Dual reservoir master cylinder that is Disc/ Disc and the correct proportioning valve. Can be found HERE
Power Brake Booster Conversion kit.
- Can be found HERE
Important Note for Installation
Master Cylinder & Brake Boosters
Fitment
- ONLY FITS THE F250 WITH 12X2 OR 2-1/8 WIDE DRUM BRAKE SHOES.
- To verify you are ordering the correct kit, measure your drum backing plate bolt hole spacing center to center on either your spindle/axle housing flange and compare to our spacing diagram.
- Fits most 16" Single Disc Brake Style Wheels and larger.
- It will not fit 15" Single Disc Brake Style Wheels, 4x4 front axles or dual wheel front hubs.
- Only fits 8 x 6 1/2" Wheel Lug Pattern. With 1/2" wheel studs.
- This kit only fits the single wheel hub, please see picture.
- Save your original hubs & bearings. Rotor presses on back side of hub.
- When converting from drum to disk. You will need to cut and re-flair your existing hard brake line or bend new ones. These are not supplied.