top of page
US FLAG.jpg

​Photos shown are a representation of the appearance of components in a kit with options.

Actual product & finish may vary for your application.​

1979-2000 Ford Rear Disc Brake Kit.   SKURDB2150FRD

1979-2000 Ford Rear Disc Brake Kit. SKURDB2150FRD

 1979-2000 Ford 7.5 Ranger Bronco II Mustang T-Bird Rear Disc Brake Kit


Our Standard Kit Does Both Sides of the Axle, and Includes:

  • Raw Metal Brackets, Grade 8 Mounting Hardware, Studs, and 11 1/4" Geomet Coated Vented Rotors. (Add Calipers to your kit to include Brake Lines)

 

Add Calipers:

Kits With Calipers Do Both Sides of the Axle, they also include the above:

  • Kits that are ordered with parking brake style calipers also include the flexible stainless steel brake lines, and cable housing extension tubes.

  • Kits with non-parking brake calipers come with flexible stainless steel brake lines.

 

Kit Options Allow You to Upgrade Your Kit to Include:

  • Calipers with Pads in Powder Coated Finish

  • Black Powder Coated Brackets.

  • Performance Drilled and Slotted Rotors

 

Disc/ Disc Applications.

  • IF you have ABS you shouldn’t need to do anything else providing the ABS system is working properly.

  • Applications PRE-ABS running Disc/Disc brakes; if you are wanting a better pedal feel, the master cylinder needs to be changed out for a master cylinder made for disc/disc applications.

  • We sell these master cylinders here: Brake Boosters 

 

 

NEW! No Weld Brake Line Tab for Your Axle Housing

  • Important Note for Installation

    • To verify you are ordering the correct kit, measure your drum backing plate bolt hole spacing center to center on either your spindle/axle housing flange and compare to our spacing diagram.

    • Fits 7" Axle flanges without machining the axles.

    • Fits most 15 Inch and Larger Disc Brake (not drum) Style Wheels. 

    • Only Fits 5 x 4 1/2" Wheel Lug Pattern. 

    • When converting from drum to disk. You will need to cut and re-flair your existing hard brake line or bend new ones. These are not supplied.

    • You may have to get new parking brake cables made to finish the install, if you are using calipers with parking brakes. We sell a universal cable HERE.

  • FITMENT

    Ford 7.5-Inch Axle:

    • 1983-2011 Ford Ranger’s without a 4.0L V6 came with the Ford 7.5-Inch Axle.

    ***1998-2011 Ford Ranger Super Cab 4×4’s are frequently equipped with 8.8-Inch axles regardless of engine size.***

    • You may need to have new park brake cables made to fit, or buy our universal cables HERE.

From $340.00Sale Price
Quantity

Related Products

bottom of page